MPE
MPE Limited
Hammond Road
Knowsley Industrial Park Liverpool
L33 7UL
Contact
T: +44 (0)151 632 9100
E: sales@mpe.co.uk

Single Line AC Filter Range – Tubular

Single line AC power line filters packaged in a tubular case designed for bulkhead mounting. The construction style provides high performance filtering in a high packing density. Suitable for voltages up to 250VAC 50/60Hz, they are often utilised in military power supplies where their high current ratings and high performance are very beneficial.

Insertion Loss Performance

Asymmetric attenuation shown as measured in 50Ω system, at all loading conditions, in accordance with CISPR-17.
Performance curve meets 100dB from 2MHz to 10GHz.

Single-Line-AC-Filters-Tubular

Rated Current
(A)		Part NumberDC Resistance
(mΩ)		Case Length
(mm)		Overall Length
(mm)		Terminal SizeApprox. Weight
(Kg)
32DS260906195275M61.5
63DS260913215295M61.5
100DS260921.5195290M81.8
200DS260930.5195300M101.8

Rated Voltage

  • 250VAC 50/60Hz

Alternative Voltage

  • Also suitable for 277VAC 50/60Hz 600VDC
  • Alternative surge arrestors may be required.

Rated Current

  • 6A to 200A (each individual line, see table)

Current Overload

  • 10 x maximum rated current for 1 sec.
  • 1.5 x max rated current for 10 minutes.

Discharge time

  • Max. 10 seconds to below 34V (filter incorporates discharge resistors)

Temperature Rise

  • 25°C case rise on full load

Storage Temperature Range

  • -45°C to +85°C Storage
  • -45°C to +50°C Working

MTBF

  • >1.5 million hours (calculated using Mil Hdbk 217F)

Surge Suppression (optional)

  • 275VAC at 151J (8/20μs)
  • All filters can be supplied with an integral metal-oxide varistor, fitted between the input terminal and earth (case).
  • Military power supplies
  • IT & Telecomms, base stations, server supplies & racks
  • Screened rooms & EMC test chambers
  • Mobile shelters
  • Supports compliance to MIL-STD-461 & DEF STAN 59-411
    • All MPE installation filters are tested using the test methods defined within the following standards and meet or exceed the relevant performance and/or safety criteria defined within these standards:
    • Mil-F-15733
    • Mil-Std-220C
    • CISPR17:2011/BS EN 55017:2011
    • UL1283
    • LVD 2014/35/EU
    • DEF-STAN 59-411/MIL-STD-461
    • RoHS (2011/65/EU) & LVD (2014/35/EU)
    • UKCA & CE
    DS XXXXX / X / X
    • Filter Part Number
    • Suffix C for standard cable entry
    • For other cable entries, see Installation Details page
    • Add suffix V for transient suppressed filter
    e.g. DS26088CV
    Specialist EMI Power Line Filters - Issue 2

    DS XXXXX / X

    • Filter Part Number
    • Add suffix V for transient suppressed filter

    e.g. DS26088V