Bulkhead Penetration Kits

Optional bulkhead penetration kits can be provided for rectangular case style filters. The tube thread size should be chosen to match the pre-pierced end compartment conduit holes.

These high-quality bulkhead penetration kits have been designed to provide an RFI tight bulkhead penetration for cables to facilitate fixing of rectangular filters to bulkheads or walls of shielded enclosures. They make it easier to achieve a full RFI seal between filter case and bulkhead up to the highest frequencies, which is not usually achievable with standard electrical conduit fittings due to badly fitting threads.

The bulkhead penetration kits can be used with a bulkhead thickness up to 20mm. They comprise a penetration tube complete with nuts, heavy duty washers, RF gaskets, and end bushes for cable protection. The main components are made from electroplated steel and the RF gaskets are made from copper sheet.

Fixing Screw Kits

Optional fixing screw kits can be provided for rectangular case style filters. The screw thread size should be chosen to match the pre-pierced end compartment fixing holes.

Fixing screw kits enable the filter to be securely fastened to the mounting surface. They can be used with a mounting surface thickness up to 20mm. They comprise a set of four screws each with washers, spring washers, nuts and lock nuts and are all made from electroplated steel with the exception of the spring washers which are stainless steel.